- A sprayer intended for the small to medium farmer with high value-for-money and great flexibility.
- Bellow sprayer intended for varied uses, with a three-point harness.
- Gearbox including speed selection and neutral gear, permitting the operator to work without bellow at high pressure.
- Centrifugal clutch for preventing breakages.
- Flow distributors in air suction for equal distribution.
- Two air inlets.
- 33”-36” bellows.
- An option to change the angle of plastic wings to increase air amounts.
- The tank is equipped with a hydraulic stirrer.
- Two spray arches, each with 26 sprinklers.
- Control system for operating the sprayer in low and high pressures.
- Operating system with 3 mechanical options on the tractor’s wing, electric in the tractor’s cabin, and a computerized system.
Technical Specifications
| Control | Mechanical/ Electronical/ Computerized |
|---|---|
| Number of Nozzles | 26 x2 – a valve for each sprinkler |
| Number of Arches | 2 primary |
| Type of Sprinklers | Cone Jet |
| PTO Horsepower | 65 Horsepower |
| 3-Point Shaft | 3-point |
| Length, Width, and Height Measurements | ? |
| Tank Size in L | 500-700 |
| Tank Material | Stainless Steel |
| Bellow diameter/number of blades | “33-“36 |
| Air cubic meters per hour | 61806 cubed m/hour |
| FIENI | |
| Air Speed | 40-53 m/s |
| Pump size L/m | 100 L/m |
| Pump Type | Pistons |
