SPRAYERS / FIELD CROPS /…
This compact sprayer is a specialized solution for high-precision plant protection.
The advanced design delivers effortless handling and deep foliage penetration while maximizing chemical savings. Read more…
This compact sprayer is a specialized solution for high-precision plant protection.
The advanced design delivers effortless handling and deep foliage penetration while maximizing chemical savings. Read more…
| Arm Length | 4.5 – 10 m |
|---|---|
| Nozzle Count | 19 – 41 pcs |
| Tank Capacity | 600 L |
| Blower Diameter | 630 mm |
| Air Speed | up to 40 m/s |
| Fan speed | up to 2800 rpm |
| Airflow capacity | up to 6 m³/s |
| PTO Requirement | Up to 35 HP |
| Control Computer | 3 -7 section with GPS |
|---|---|
| Valves | Electric valves |
| Nozzle Type | Ceramic nozzles |
| Nozzle Count | 19–41 depending on arm length |
| Pump Type | Diaphragm pump up to 70L/ min |
| Control Options | Mechanical or electric manifold |
| Mounting | Quick-hitch or 3-point linkage |
|---|---|
| Hydraulic Motor & Radiator | Hydraulic drive with cooling system |
| Oil Tank | 60 L capacity (optionaly) |
| Cardan Shaft | Protected, up to 35 HP |
| Hydraulic Cylinders | 2 cylinders for arm closure |
| Arms | Right and left steel arms with modular extensions |
| Cables & Springs | Support and stabilization system for arms |
| Inflatable Sleeves | PVC reinforced sleeves for air distribution |
| Spray Manifold | Mechanical or electric valve block |
| Pump | Bertolini (Italy ): PA530 VC; PA730.1 VM |
| Tank | Polyethylene (plastic), chemical resistant |
|---|---|
| Arms | Steel, anti-corrosion coated |
| Sleeves | Reinforced PVC inflatable sleeves |
| Blower Housing | Steel, anti-corrosion coated |
| Frame | Steel, anti-corrosion coated |
Precise spraying with low drift and better crop penetration
Mini Inflatable Sleeve Sprayer is a compact mounted sprayer designed for growers who need accurate and controlled crop protection in conditions where drift reduction, chemical efficiency, and reliable coverage are critical. Its mounted design makes it practical for narrower working areas, headlands, service lanes, field edges, and other zones where larger spraying systems are less convenient. With working-width options from 4.5 to 10 m, the machine can be adapted to different crop layouts and operating conditions while remaining compact, precise, and easy to handle.
The inflatable air-sleeve system does more than simply direct the spray forward. It creates a controlled air stream around the spray zone, causing leaves and stems to move during application. As the crop canopy becomes more active, the spray can reach not only the outer surface of the plant, but also deeper parts of the canopy, covering more of the leaf and stem area from different angles. This helps improve coverage and supports more effective plant protection, especially where uniform application is essential.
This spraying principle also provides an important practical advantage in conditions where wind, heat, and chemical cost directly affect spray performance. Air-assisted systems are valued for producing a more directed spray pattern, reducing off-target loss, and allowing growers to work with more confidence in more challenging weather conditions than with a conventional boom alone. For the farm, this means more precise application, less wasted spray solution, and better overall control of the treatment result.
The spraying system includes reinforced inflatable PVC sleeves, 19–41 ceramic nozzles, a 630 mm blower, air speed up to 40 m/s, and airflow capacity up to 6 m³/s. This configuration creates a controlled air-assisted spray pattern that improves penetration into the crop, reduces drift, and supports more stable coverage. The machine can also be equipped with computer control, GPS-based 3–7 section operation, electric valves, and either mechanical or electric manifold options, giving growers better accuracy and greater flexibility in daily work.
Mini Inflatable Sleeve Sprayer is especially well suited for field vegetables, specialty crops, low-growing crops, and drift-sensitive areas where compact machine size and controlled spraying are more important than maximum boom width. In practice, this can include crops such as carrots, dry onions, potatoes, melons, peppers, tomatoes, and cucumbers, as well as other crops where careful spray placement and stable coverage are important. It is also a strong solution for work near infrastructure and solar panels, where compact geometry and reduced drift offer clear operational advantages.
The machine is built with a 600 L chemical-resistant polyethylene tank, anti-corrosion coated steel frame and arms, and a reliable diaphragm pump system with Bertolini options. With quick-hitch or 3-point linkage mounting and PTO requirement up to 35 HP, it combines compact size, directed airflow, and practical reliability in one mounted sprayer. This is the right solution for growers who need not just a smaller machine, but a precise mounted sprayer for demanding and sensitive working conditions.
