SPRAYERS / FIELD CROPS /…
This inflatable sleeve sprayer is a strategic solution for uniform and efficient crop protection.
Its large-capacity tank and powerful airflow system ensure consistent application and wide coverage during intensive field operations. Read more…
This inflatable sleeve sprayer is a strategic solution for uniform and efficient crop protection.
Its large-capacity tank and powerful airflow system ensure consistent application and wide coverage during intensive field operations. Read more…
| Arm Length | 18 – 24m |
|---|---|
| Nozzle Spacing | 25-50 cm |
| Rear tank capacity | 1000/1500/2000L |
| Front tank capacity | 850/1000/1500 L |
| Blower Diameter | 810 mm |
| Air Speed | up to 40 m/s |
| Fan speed | up to 2800 rpm |
| Airflow capacity | up to 10 m³/s |
| PTO Requirement | Minimum 90 HP |
| Control Computer | 3-7 section with GPS |
|---|---|
| Valves | ARAG or BERTOLINI electric valves |
| Nozzle Type | Hollow cone / flat fan nozzles, selected by client |
| Pump (tank 1000L) | Piston 105 L/min |
| Pump (tank 1500,2000l) | Diaphragm 150 L/min |
| Mounting | Quick-hitch or 3-point linkage |
|---|---|
| Shock Absorbers | Installed on arms for vibration reduction |
| Arm Balancing System | Stabilizers to prevent breakage, balance control |
| Hydraulic Cylinders | 5 cylinders with mechanical or electric selector block |
| Fan Drive Option 1 | PTO drive via gearbox and cardan shaft |
| Fan Drive Option 2 | Hydraulic motor drive with oil cooling radiator |
| Safety Units | Right and left complete safety assemblies |
| Cables & Springs | Support and retention system for arms |
| Inflatable Sleeves | Air sleeves mounted on spray arms |
| Rims & Flutes Sets | Included accessories for distribution |
| Pumps | Bertolini CKA 110-P;PBO 1540.1 VD |
| Lighting for arms | Optional |
| Mixer for adding | Optional |
| Water dispenser | Optional |
| Tank rear | Polyethylene (1000L), stainless steel (1500;2000L) |
|---|---|
| Tank front | Stainless steel |
| Arms | Stainless steel, with tarp sleeve |
| Sleeves | Reinforced PVC inflatable sleeves |
| Blower Housing | Plastic |
| Frame | Steel, anti-corrosion coated |
High-capacity air-sleeve sprayer for wide, uniform field coverage
Sleeve Boom 810 is a high-capacity mounted air-sleeve sprayer designed for growers who need uniform crop protection over wide field areas with stronger control of drift and coverage quality. With working widths from 18 to 24 m, this machine is built for intensive field operations where wide coverage, steady performance, and efficient use of spray solution matter. Its air-sleeve boom concept combines broad field productivity with a more directed spray pattern, helping growers maintain better consistency across the full working width.
A major advantage of Sleeve Boom 810 is its powerful airflow system, built around an 810 mm blower with air speed up to 40 m/s. The directed airflow helps move leaves and crop mass during spraying, improving penetration into the canopy and helping the spray reach more of the plant from different angles rather than remaining only on the outer surface. This makes the machine especially useful where full plant coverage is important for crop protection quality, including field crops and open-field vegetable systems. The page also highlights minimal spray drift and wide working coverage as core advantages of this model.
Because the spray is supported by air sleeves mounted on the boom arms, Sleeve Boom 810 is especially relevant in demanding working conditions where wind sensitivity, spray loss, and uneven coverage can reduce field performance. It is a strong solution for farms that want to improve canopy penetration, reduce off-target movement, and maintain more confidence in wide-area spraying during intensive daily work.
Sleeve Boom 810 combines wide boom performance with a durable and flexible technical structure. The machine can be supplied with rear tank capacities of 1000, 1500, or 2000 L, plus front tank capacities of 850, 1000, or 1500 L, allowing farms to match the sprayer to different operation sizes and spraying programs. The boom arms are made of stainless steel and fitted with reinforced PVC inflatable sleeves, while the frame is built from anti-corrosion coated steel for long-term field durability.
The spraying system can be configured with computer control for 3–7 sections with GPS, ARAG or Bertolini electric valves, and client-selected hollow cone or flat fan nozzles depending on crop type and spraying needs. Pump options include a 105 L/min piston pump for the 1000 L version and a 150 L/min diaphragm pump for the 1500 and 2000 L versions. The machine also offers two fan-drive options — PTO drive via gearbox and cardan shaft or hydraulic motor drive with oil-cooling radiator — giving additional flexibility for different tractor and farm setups. Shock absorbers, stabilizers, support cables, springs, and safety assemblies are all included to support safer and steadier boom operation across long field passes.
In practical use, Sleeve Boom 810 is well suited for field crops and open-field vegetables where wide coverage and stronger penetration into the crop canopy improve treatment quality. This can include crops such as corn, potatoes, onions, carrots, legumes, and other field-grown crops, as well as vegetable systems where spray placement, drift control, and consistent canopy coverage are especially important. It is a strong choice for growers who want a wide mounted sprayer with air-assisted boom technology, stainless steel boom durability, and high-capacity field performance.
