SPRAYERS / FIELD CROPS /…
This inflatable sprayer is a strategic solution for precise and gentle crop protection.
Its advanced sleeve system ensures effective application of chemicals to all parts of the plant. Read more…
This inflatable sprayer is a strategic solution for precise and gentle crop protection.
Its advanced sleeve system ensures effective application of chemicals to all parts of the plant. Read more…
| Arm Length | 12.5 – 18m |
|---|---|
| Nozzle Spacing | 25-50cm |
| Rear tank capacity | 1000L |
| Front tank capacity | 850 – 1500L |
| Blower Diameter | 762mm |
| Air Speed | up to 40 m/s |
| Fan speed | up to 2800 rpm |
| Airflow capacity | up to 8 m³/s |
| PTO Requirement | Minimum 90 HP |
| Control Computer | 3-7 sections with GPS |
|---|---|
| Valves | ARAG or BERTOLINI electric valves |
| Nozzle Type | Hollow cone / flat fan, chosen by client |
| Pump Type | Piston 105 L/min |
| Mounting | Quick-hitch or 3-point linkage |
|---|---|
| Shock Absorbers | Installed on arms for vibration reduction |
| Arm Balancing System | Stabilizers and balance control to prevent breakage |
| Hydraulic Cylinders | 3–5 cylinders with mechanical or electric selector block |
| Fan Drive Option 1 | PTO drive via gearbox and cardan shaft |
| Fan Drive Option 2 | Hydraulic motor drive with oil cooling radiator |
| Safety Units | Right and left complete safety assemblies |
| Cables & Springs | Support and retention system for arms |
| Inflatable Sleeves | Air sleeves mounted on spray arms |
| Rims & Flutes Sets | Included accessories for distribution |
| Control Computer | Computer with GPS antenna (option) |
| Pump | Bertolini CKA 110-P (Italy) |
| Lighting for arms | Optional |
| Mixer for adding | Optional |
| Water dispenser | Optional |
| Tank rear | Polyethylene (plastic), chemical resistant |
|---|---|
| Tank front | Stainless steel |
| Arms | Stainless steel, with tarp sleeve |
| Sleeves | Reinforced PVC inflatable sleeves |
| Blower Housing | Plastic |
| Frame | Steel, anti-corrosion coated |
Compact air-sleeve sprayer for controlled field coverage
Sleeve Boom 762 is a mounted air-sleeve sprayer designed for growers who need precise crop protection with reduced drift, reliable canopy penetration, and practical field handling. With working widths from 12.5 to 18 m, it gives farms the benefit of air-assisted boom spraying in a more compact format, making it a strong choice for professional field work where accurate application and efficient use of spray solution are essential. The mounted structure and moderate boom range make it especially useful for farms that want strong spray performance without moving to a heavier or more complex platform.
A key advantage of Sleeve Boom 762 is its advanced inflatable sleeve system, which directs airflow along the boom and supports a more controlled spray pattern. The air movement helps activate the crop canopy during spraying, allowing the spray to reach more of the plant surface instead of remaining only on the outer layer. This improves crop coverage, supports better penetration into the canopy, and helps reduce off-target spray movement. For farms working in warm, dry, or wind-sensitive conditions, this type of system offers an important practical advantage by combining more accurate spraying with lower chemical loss.
Sleeve Boom 762 combines compact air-assisted boom technology with durable professional components. The machine is built with a 1000 L rear tank, optional 850–1500 L front tank, stainless steel boom arms with tarp sleeve, reinforced PVC inflatable sleeves, and a 762 mm blower delivering air speed up to 40 m/s and airflow capacity up to 8 m³/s. This combination helps create a directed spray-and-air pattern that improves coverage quality while keeping the machine practical for daily field use.
The spraying system can be configured with manual, electric, or computer control, including 3–7 section GPS-based operation, ARAG or Bertolini electric valves, and client-selected hollow cone or flat fan nozzles depending on crop and application needs. The machine uses a 105 L/min piston pump and can be mounted by quick-hitch or 3-point linkage. Shock absorbers, stabilizers, hydraulic cylinders, support cables, and safety assemblies help protect the boom arms and improve working stability. Overall, Sleeve Boom 762 is a strong solution for growers who want a mounted sprayer that combines controlled airflow, stainless steel boom durability, practical width, and reliable crop protection performance in field crops and open-field vegetable systems.
